TPS System Card Model   51401052-100  51403519-160  51305099-100   51403519-160 51304907-100  51305072-100  51196653-100  51403645-400  51403698-100 51196655-100  51196655-100  51305072-200 51305072-300 51401583-100  51305896-200  51403988-150  51309276-150 Replacement Model 51307190-150  51402573-250 51303979-550  51304493-250  51304518-150  51304685-150  51198947-100 51404174-225  51303948-100  51204126-00#  51401140-450  MC-FAN511 51303940-250  51201420-010 51201420-005  51201395-100  51190782-200  51195153-*** UCN  51195199-*** UCN  51304362-150  CC MC-PLAM02 51304362-250 MC-PSDX02 51304386-150  MC-PPIX02 51304481-150  51304485-150 IOP, DI, CC MC-PDIX02 51304487-150 IOP, D/O, CC MC-PDOX02 51304362-350 IOP, Serial Interface Card MC-PSIM11 51304362-250 IOP, Serial Device Interface Card MC-PSDX02 51304754-150 IOP, HL...

Product description:   Using analog inputs as digital inputs allows multiple (or all) analog inputs to be configured as digital inputs. In doing so, they evaluated the input voltage higher than ca+ 7 V as signal 1. In this input impedance operation mode, it is about 4 kW. Terminal M is the reference potential. The input signal delay is 7 ms. It cannot be configured. The input is not electrically isolated. They may be shorted to AGND. Unused inputs must be configured as Unused. The relationship between the analog input signal and the converted digital is shown in the figure below. Make sure that the high speed counter is not configured for operating mode 1 or 2 (see also chapter "High speed counter"). Characteristics of analog input: 8 analog inputs are not electrically isolated. Resolution 12 bits of A/D converter. Analog signals are conducted in shielded cables (see Analog inputs can be individually configured in ma...

ABB controller Both Compact Control Builder and 800A control builder can be used to configure AC800M. With Compact Control Builder configuration, AC800M can be used in all control solutions. With 800XA Control Builder configuration, AC800M becomes a part of tight integration on 800XA DCS and can be used as an attachment of 800xA system.   AC 800M CPU module Various CPU modules can provide different functions, processing capacity, memory and redundancy support. Each CPU module is equipped with one or more Ethernet ports to exchange data with different controllers or interact with operators, engineers, managers and higher level applications. When availability becomes the most important, these Ethernet ports can be configured as redundant. Each CPU module is also equipped with two RS-232C ports, which can exchange point-to-point data with programming/debugging tools or third-party systems and devices.   Com and I/O module For each CPU module, multiple communication and...

ArmorBlock 50001/0 Blocks lmagine having the flexibility to meet challenging application needs with minimal operation disruption andcost. 0ur ArmorBlock 50000 1/0 blocks integrated with 10-Link technology can help you achieve that. Designed for On-Machine"" use in harsh environments, our ArmorBlock 5000 1/0 solution offers the scalabilitvthat will help reduce total installation time and cost and unplanned downtime. The industrially-hardenedblocks offer rating up to lP69K, three power variants, flexible mounting options, and 10-Link Class A andClass B ports. Also, the distributed l/0 blocks are integrated with Studio 5000e design software to provideexceptional performance and ease in manufacturing.     What's New Improved ArmorBlock 5000 IO-Link Master Block – More powerful, efficient and flexible than before   l Elevated Flexibility Customize and expand your machine capabilities with the generic IO-Link profile, which allows compatibility with a wide range of ...

The Siemens 6A series touch screen is an important component of Siemens industrial automation products, widely used in various industrial control systems. The following is a detailed introduction to the Siemens 6A series touch screen:     1、 Product Overview   The Siemens 6A series touch screen, as a human-machine interaction interface (HMI) device, has the characteristics of high performance, high reliability, and easy operation. They are usually used in conjunction with Siemens PLC (Programmable Logic Controller) to achieve functions such as monitoring, control, and data acquisition in industrial sites.   2、 Product Features   Diversified screen sizes: The Siemens 6A series touch screen offers a variety of screen size options, such as 4.3 inches, 7 inches, 9 inches, 12 inches, etc., to meet the needs of different industrial applications.   High resolution display: Adopting a high-resolution TFT display screen, supporting multiple color displays (such as ...

The Schneider 140 series, also known as the Quantum series PLC, is a powerful and flexible medium to large programmable logic controller (PLC) launched by Schneider Electric. This series of PLCs is widely used in the field of industrial automation, including manufacturing, energy, transportation, water treatment, and other industries, to meet the diverse needs of different customers.     1. Product features   Powerful data processing capability: Schneider 140 series PLC can process various input signals and convert them into meaningful data for controlling decision-making and generating output signals. This powerful data processing capability enables this series of PLCs to cope with complex industrial automation tasks.   Multiple communication functions: Supports multiple communication protocols and interfaces, such as Modbus, Profibus, EtherNet/IP, etc., to achieve distributed control and data acquisition. The diversity of communication functions enables Schneider ...

In the vast landscape of Variable Frequency Alternating Current (AC) drives in industrial automation, the PowerFlex 527 was developed to integrate seamlessly with different industrial automation systems. These drives are well regarded for their adaptability and safety characteristics. In this article, we will start by exploring the technical specifications of the series as a whole and then move to the individual drives/ modules this series offers.   Some of the technical specifications of the series as a whole • Safe Torque-Off: This feature reduces the possibility of harm or damage to equipment by immediately cutting off torque production when a safety circuit is activated. • Certifications: Complying with worldwide safety and quality laws, certifications from RCM, CE, TUV, KCC, and EAC standards guarantee compliance and enable smooth connection with different automation systems. • Power Ratings: A wide range of power ratings, including 0.4 to 22 kilowatts or 0.5 t...

Omron C200H series PLC is an industrial automation control equipment with complete functions, stable performance, and compact structure.     Product Overview The C200H series PLC is a small modular PLC launched by Omron, which has the characteristics of strong adaptability and flexible application. This series of PLCs provides fast instruction processing speed and has a high I/O density/volume ratio, making it widely used in various industrial automation scenarios.     Product Features • I/O points and scalability: When using an 8-point I/O unit, the number of I/O points can reach 240; When using 16 point units, it can reach 480 points. Support multiple specifications of expansion racks, such as 3 slots, 5 slots, 8 slots, and 10 slots, to meet different application needs.   • Processing speed and storage capacity: The processing speed of basic instructions is 0.75 μ s/piece, and the processing speed of complex instructions is 2.25 μ s/piece. The...

In the field of automation and control systems, ABB undoubtedly stands out as an industry leader. As a global pioneer in power and automation technologies, ABB continuously introduces innovative products to meet the ever-growing demands of industrial automation.   Overview of the NDSM Series The NDSM series is a high-performance, multifunctional digital servo module offered by ABB, extensively utilized in various industrial automation systems. This series has gained widespread favor among users for its exceptional performance, stability, and flexibility.     Key Data and Parameters Models: The NDSM series encompasses multiple sub-models, such as NDSM01, NDSM03, NDSM05, etc., to cater to the needs of diverse application scenarios. I/O Points: Taking NDSM01 as an example, it has 8 I/O points, sufficient for general control requirements. Operating Voltage: The operating voltage range of NDSM series modules is broad, typically between 3-40V, depending on the model and config...

In today's highly automated industrial sector, DCS (Distributed Control System) plays a pivotal role. ABB's 800xA System stands out as a leader, earning widespread recognition for its powerful functionality, flexible configuration, and exceptional performance.     I. Data Parameters As a communication interface module in the S800 series, CI801 bears the responsibility of communicating with Profibus-DPV1 networks. Its main data parameters are as follows: Communication Standard: Supports the PROFIBUS-DPV1 communication standard. Supply Voltage: 24V (19.2~30V d.c.). Isolation Voltage Rating: 50V. Maximum Number of S800 I/O Stations: Can reach up to 99 stations in a standalone configuration; supports 62 stations in a redundant configuration (e.g., using CI840). Bus Scan Cycle: Depends on the type and number of I/O modules, but performance reference data for the CI801 module indicates that the system can accommodate various scales of I/O configurations. Number of I/O Modules withi...

In the field of industrial combustion control, Honeywell, as a global leader in technology solutions, has made its RM7840L series combustion controllers widely used in industrial combustion systems such as gas and oil-fired systems due to their high reliability, precise control, and intelligent functions.     I. Product Technical Parameters and Core Performance 1.Basic Parameters The RM7840L1018, as a typical model in the RM7840L series, features the following key technical parameters: Power Supply Voltage: Supports 120V or 230VAC (configured according to specific models), compatible with global industrial power grid standards. Operating Current: Rated operating current of 24A, meeting the needs of high-power combustion equipment. Operating Voltage: 24V DC output, providing stable power supply for peripheral sensors and actuators. Power: Rated power of 220W, suitable for large industrial boilers, heating furnaces, and other applications. Control Inputs: Supports multiple type...

Technical Specifications Part Number: Ovation 1C31204G01 Manufacturer: Emerson Automation Solutions Input Voltage: 24V DC (18-32V range) I/O Channels: 16 analog inputs (4-20mA) / 8 digital outputs Communication Protocols: Modbus TCP/IP, OPC UA, HART MTBF: >250,000 hours Certifications: ATEX, IECEx, SIL 3         1C31204G01 Features The Ovation modules have the following features: • Available in both remote and local configurations. • Modular, "plug-in" components. • Quick installation and configuration of the modules. • DIN Rail mounting of the I/O Base Units. • Wiring schematic labels are provided on Personality modules for Standard I/O. • Wiring directions (Normally Closed (NC), Normally Open (NO), Common (C)) are provided on the Base Unit for Relay Output modules. • Writable surface labels are provided on Standard I/O Electronics modules so that up to 16 point names can be identified on each label. • The labels on the St...