6GK7443-5FX02-0XE0
The 6GK7443-5FX02-0XE0 model product is the CP443-5 basic communication processor of Siemens S7-400 series PLC. As a system connection module, it can integrate SIMATIC S7-400 into multi vendor automation systems through PROFIBUS FMS, support S7 redundant communication, reduce CPU communication tasks, achieve data exchange with PROFIBUS stations, programming components, operator interface systems, and other SIMATIC S7 systems, and is compatible with communication with SIMATIC S5 programmable controllers. It is suitable for industrial automation scenarios that require high reliability and multi protocol support.
Technical specifcations for 6GK7443-5FX02-0XE0
Brand and Model: Siemens, Model 6GK7443-5FX02-0XE0.
Product type: Basic communication processor, belonging to the CP443-5 series, used for communication of SIMATIC S7-400 PLC.
Communication services:
Support PG/OP communication, allowing all S7 stations connected to the network to perform remote programming.
Support S7 communication, used to connect SIMATIC S7 automation systems, programming devices, PCs, etc.
Supports S5 compatible communication (SEND/READIVE) and can communicate with SIMATIC S5 PLC with PROFIBUS interface.
Supports PROFIBUS-FMS communication, according to IEC 61158/EN 50 170 standard, can be used for read and write access to variables from communication partners of user programs.
Interface features: Using a 9-pin D-type connector for connecting to PROFIBUS networks.
Design Features:
Compact design, single width template.
Easy to install, insert into S7-400 subrack and connect to other templates of S7-400 through backplane bus, with no slot rules during use.
No fan, backup battery, or storage template is required for use.
Functional features:
Reduced the communication workload of the CPU and improved the overall performance of the system.
Supporting redundant S7 communication improves the reliability of the system.
Support time synchronization and use PROFIBUS for simple programming and configuration.
Configuration requirements: STEP 7 or STEP 7 and NCM S7 for PROFIBUS are required for configuration. NCM S7 is fully integrated into the STEP 7 environment and has been an integrated part of STEP 7 since version V5, without the need for separate ordering or product authorization.
Electrical parameters:
Working voltage: typically 24V DC (specific voltage range may vary depending on product batch or application scenario).
Parameters such as rated current and power consumption may vary depending on specific application scenarios and configurations.
Environmental adaptability:
High protection level, able to adapt to the harsh environment that may exist in industrial sites.
The specific working temperature range, humidity range, and other environmental parameters may vary depending on the product batch or application scenario.
Our Services:
1、All our products are new and orginal, and of good quality
2、Our prices are very competitive.
3、 We have a large quantity in stock, so we could help the customers to get the components which are dificult to get.
4、All inquiries will be valued and will reply in 24.
Packing & Delivery:
1、100% brand New and Original Factory Seal!
2、Warranty:1 year
3、Package: Original packing with cartons.
4、Delivery time: Shipped in 3-7 days after payment
5、All the goods will be tested before shipment
More Products In Stock:
| 6ES7323-1BH00-0AA0 | 6GK1901-0CA01-0AA0 | 6ES7322-1BH00-0AA0 | 6ES7658-3XB16-2YD5 | 6ES7215-1AL40-0XB0 |
| 6ES7144-4GF01-0AB0 | 6ES7368-3BB00-0AA0 | 6ES7658-7EX18-0YB5 | 6ES7390-7BA00-0AA0 | 6ES7392-2AX10-0AA0 |
| 6ES7331-7KB00-0AB0 | 6GK1704-1PW33-3AA0 | 6ES7214-1AD20-0XB0 | 6ES7321-7RD00-0AB0 | 6ES7221-1BF20-0XA0 |
