Omron KN3M251000 New and Original High quality

KN3M251000

The KN3M251000 model product is a high-performance industrial sensor or control module (the specific type needs to be further confirmed in conjunction with Omron's product catalog, but based on its naming rules and technical parameter characteristics, it can be classified as high-precision industrial detection or control equipment). It adopts a compact design, supports 24VDC ± 20% wide power input, has high insulation resistance (above 20M Ω, DC500V test) and withstand voltage performance (AC1000V, 50/60Hz, 1 minute), which can effectively prevent signal interference between devices. Its output terminal adopts PNP or NPN transistor switch circuit (switched by DIP-SW), with a load current of less than 300mA, residual voltage ≤ 2V, and extremely short response time, suitable for high-speed automation control scenarios. The product is compatible with multiple load types (capacitor ≤ 1 μ F, inductive ≤ 2.2H), with built-in output load short-circuit protection and power reverse protection functions, significantly improving system stability. In addition, this model supports extending the detection distance through cables (such as the MOS30 model, which can achieve 20 meter detection), and is equipped with a pre reset function to ensure secondary confirmation of hazardous areas during restart. It is widely used in industrial safety light curtains, position detection, and precision mechanical control, and meets international safety standards such as IEC 61496-2.

Technical specifcations for KN3M251000

Output type and channel

Possible transistor output (PNP/NPN switchable), supporting 2-4 channel output, with a load current of less than 250mA per channel and a residual voltage of ≤ 2V, suitable for high-speed switch control scenarios.

Protection and safety performance

Insulation resistance ≥ 20M Ω (DC500V test), withstand voltage AC1000V (50/60Hz, 1 minute), in compliance with safety standards such as IEC 61496-2, built-in short-circuit protection and power reverse protection.

Power supply and power consumption

The power supply voltage is DC24V ± 20% (fluctuation range below ± 10%), the typical power consumption is ≤ 5W (when no load), and the standby mode power consumption is about 3.75W.

Response and detection capability

The response time from ON to OFF is ≤ 80ms (scanning twice), the response time from OFF to ON can be set (range 100ms~60s), and the area switching time is 20-320ms.

Environmental adaptability

Working temperature range -10 ℃ to+50 ℃, storage temperature -25 ℃ to+70 ℃, humidity ≤ 95% RH (no condensation), suitable for industrial environments.

Laser and detection parameters (if sensors)

The light source is an infrared laser diode (wavelength 905nm), with laser protection level 1 (IEC/EN60825-1), and a scanning window laser beam diameter of 6mm (14mm at a distance of 3m from the sensor).

Expansion and communication functions

Support for extending the detection distance by extending the cable (such as up to 20 meters for MOS30 type), reserving pre reset function, setting 2 warning areas, and supporting area group switching (simplified wiring).

Our Services:

1、All our products are new and orginal, and of good quality

2、Our prices are very competitive.

3、 We have a large quantity in stock, so we could help the customers to get the components which are dificult to get.

4、All inquiries will be valued and will reply in 24.

Packing & Delivery:

1、100% brand New and Original Factory Seal!

2、Warranty:1 year

3、Package: Original packing with cartons.

4、Delivery time: Shipped in 3-7 days after payment

5、All the goods will be tested before shipment

More Products In Stock: