The PLC-5 controller is in the central position of the control system, integrates the existing and future systems through ethernet/ip, ControlNet and DeviceNet, and provides the interconnection between SLC 500, ControlLogix and Micrologix processors. Because the PLC-5 processor has built-in network connection, PLC-5 makes the control structure flexible enough to establish economic connection between a wide range of equipment.   The minimum configuration of a PLC-5/1771 control system includes a programmable controller module and some input and output modules and power supply modules installed on a rack. The controller with communication port can be selected as required. PLC-5 can reach 512 input and output points at most. All PLC-5 processors have remote I / O interfaces. Some PLC-5 processors have local extended I / O interfaces. Some PLC-5 processors have local extended I / O interfaces. Some PLC-5 processors have a ControlNet communication int...

Trusted   The TrustedTM system is the simplest, safest and most reliable TMR system on the market. ICS Triplex technology and process are used in a variety of key processes worldwide to ensure the safety of personnel, equipment and the environment.   Introduction:   The TrustedTM system is the simplest, safest and most reliable TMR system on the market. ICS Triplex technology and process are used in a variety of key processes worldwide to ensure the safety of personnel, equipment and the environment. ICS Triplex solution can ensure the highest availability and reliability in emergency shutdown (ESD), fire and gas detection (F&G) applications. The PI module provided in the unit application has its own overspeed protection function to ensure the safe and reliable operation of the system without external connection and reduce the risk of failure.     Characteristic:   In the system based on triple processor, all the important internal ...

ABB controller Both Compact Control Builder and 800A control builder can be used to configure AC800M. With Compact Control Builder configuration, AC800M can be used in all control solutions. With 800XA Control Builder configuration, AC800M becomes a part of tight integration on 800XA DCS and can be used as an attachment of 800xA system.   AC 800M CPU module Various CPU modules can provide different functions, processing capacity, memory and redundancy support. Each CPU module is equipped with one or more Ethernet ports to exchange data with different controllers or interact with operators, engineers, managers and higher level applications. When availability becomes the most important, these Ethernet ports can be configured as redundant. Each CPU module is also equipped with two RS-232C ports, which can exchange point-to-point data with programming/debugging tools or third-party systems and devices.   Com and I/O module For each CPU module, multiple communication and...