The 5069-OBV8S is a Compact 5000 Digital 8-point Safety Source Output Module from Allen-Bradley by Rockwell Automation. Here’s a detailed product introduction with a focus on product parameters:

Basic Information

• Model: 5069-OBV8S.
• Series: Compact 5000 I/O Safety Output Module.

Electrical Parameters

• Output Signal: 10–32V DC.
• On-State: Minimum voltage 17.5V DC, rated voltage 24V DC, maximum voltage 32V DC; on-state voltage drop max 0.5V DC; on-state current per channel minimum 10mA.
• Off-State: Off-state voltage max 0.5V DC, off-state leakage current max 15mA per point.
• Output Current Rating: 1A per channel.
• Surge Current: Max 15A per point.
• Output Delay: Max 4ms from off to on, max 4ms from on to off.
• Safety Integrity Level: Achieves SLCL3, P.Le, Cat.4.
• Safety Response Time: 4.5ms.
• Pulse Width: Minimum 400μs.

Diagnostic Features

Supports field power loss detection, no load detection, output short circuit / overload detection, output short circuit / overload protection, output over - temperature detection, output over - temperature protection, reverse voltage protection, overvoltage protection, and CIP synchronization. Each output point supports these diagnostic and protective functions.

Output Control

• Fault Mode Output Control: None — once a fault is detected, the output will enter a safe state and remain off until the fault is cleared and the safety output is commanded to enter a safe state.
• Programming Mode Output Status: All points off.
• Fault Mode Output Status: All points off.
• General Specifications
• Number of Outputs: 8.
• Isolation Voltage: 250V continuous, with basic insulation type. No isolation between the LA power supply and the output ports, or between individual output ports.
• Power Dissipation: Max 6.5W power dissipation, max 6.5W thermal dissipation.
• Dimensions: Approximately 138mm in height (5.43 inches), 36mm in width (1.42 inches), and 105mm in depth (4.15 inches).
• Weight: 0.336KG.
• Mounting Rail: Compatible with tin - plated or chromium - passivated steel DIN rails. Can be mounted on EN50022 - 5x7.5mm (1.38x0.30 inches) mounting rails.

Electromagnetic Compatibility and Environmental Parameters

• Electromagnetic Interference: Meets IEC 8000 - 6 - 4 standard.
• Electrostatic Discharge Immunity: Contact discharge 6MY, air discharge 8M. Complies with IEC 8000 - 4 - 2 standard. Test conditions: 20V/m, 1kHz sine wave, 80% modulation, frequency range 80...2000MHz.
• Radiated RF Immunity: Meets IEC 8000 - 4 - 3 standard. Test conditions: 20V/m, 200Hz modulation, 50% pulse, 100% modulation. Test frequencies: 900MHz, 1800MHz, 2000...2700MHz.
• Fast Transient Immunity: Meets IEC 8000 - 4 - 4 standard. Test conditions: 5kW@5kHz on signal ports.
• Surge Immunity: Meets IEC 8000 - 4 - 5 standard. Test conditions: 5kW line - to - line (MM) and ±2W line - to - ground (CM) on signal ports.
• Conducted RF Immunity: Meets IEC 6000 - 4 - 6 standard. Test conditions: 10Vrms, 1kHz sine wave, 80% modulation, frequency range 50kHz...30MHz.
• Voltage Dips: Allows 10ms interruptions on the DC power supply port. Meets IEC 6000 - 4 - 29 standard.

Applications

It is suitable for industrial automation applications where digital signal acquisition and control are needed at the same time. It supports multiple communication protocols and interfaces. It can be seamlessly connected with other Rockwell Automation devices such as CompactLogix and ControlLogix controllers. This makes it convenient to expand the system's I/O capabilities.

Conclusion

The 5069-OBV8S digital output module is a cutting-edge device designed to meet the demands of various industries. In the field of industrial automation, it seamlessly integrates with automation systems to enhance production efficiency and precision. For machinery manufacturing, it offers reliable control over equipment operations, ensuring smooth production processes. In the realm of logistics automation, it plays a crucial role in automating material handling and warehouse management systems. Additionally, the 5069-OBV8S is well-suited for applications in food processing, packaging, and the automotive industry, where precise control and safety are paramount. It also delivers exceptional performance in the chemical industry, pharmaceuticals, and electronics production, providing robust and accurate digital output capabilities to meet the specific requirements of these sectors.